- Maadi, Cairo
- عرض على الخريطة
- Maadi, Cairo
- عرض على الخريطة
We found 11 products for you
TDA
Electronic Temperature sensor
The KOBOLD TDA is a compact, industrial-grade electronic temperature sensor designed for precise temperature monitoring with both display and analog output. It combines a semiconductor sensor, built-in electronics, and user interface within a rugged stainless steel housing.
- Measuring range: -20 to +120°C (compact version)
- Measuring range: -50 to +125°C (separate version)
- Connection: various connection
- Material: st-steel
- Supply: 24 VDC
- Accuracy: ±0.5°C
PT-25
Temperature transmitter
The PT‑25 is a rugged and factory-configured temperature transmitter designed for precision measurement of liquid and gaseous media.
- Measuring range: -50 to +100°C
- Connection: G1/2"
- Output: 4-20 mA
- Accuracy: ±1 %
- Protection: IP65
Intrinsically safe industrial measuring probe
Humidity and temperature transmitters
The intrinsically safe industrial measuring probe from JUMO is a humidity and temperature transmitter designed for use in explosive atmospheres (ATEX Zone 0/1/2, dust and gas). It’s not just a sensor-it's a transmitter that outputs a 4-20 mA signal directly.
- Humidity range: 0 to 100 %
- Temprature range: -70°C to +180°C
- Measurement medium: Air; compressed air; vacuum
- Application: Pharmaceutical industry; petrochemical industry; food technology
- Outputs: 4-20 mA
LI-24G
Head-mounted smart temperature transmitter
The LI‑24G is an intelligent, head-mounted temperature transmitter that converts a wide range of sensors-including RTDs (e.g., Pt100, Pt1000), thermocouples, RTD pairs, and millivolt sources-into standardized 4–20 mA signals with HART® digital communication, and is available in intrinsically safe (Ex i) and SIL-certified versions
- Temperature: -25 to +75 °C
- Output: 4-20 mA
- Programmable sensor type
- Hart protocol
TBE
Bi-metal Thermometer
The TBE is a robust bi-metal dial thermometer, ideal for heavy-duty process environments such as food & beverage, pharmaceutical, chemical, and petrochemical industries.
- Measuring range: -50 to +600°C
- Connection: various connection
- Accuracy class: 1.0
- Housing: Ø 100; 125; 150 mm
- Housing material: st-steel
JUMO exTHERM-AT
Surface-mounted thermostat
The exTHERM‑AT is a rugged, surface-mounted thermostat designed to monitor and control temperatures in hazardous zones (Zones 1, 2, 21, and 22). It's built with a sealed Bourdon‑tube sensor and snap‑action switch, all safely encapsulated to prevent ignition.
- Switching capacity: 16 A - 230 V
- Tmax: 500°C
- Protection type: IP 65/ IP 67
HND-T105
Precision Hand-Held Thermometer
A high‑precision, portable thermometer ideal for calibration and lab-grade temperature measurements using a Pt100 4‑wire probe.
- Measuring range: -50 to +1768°C
- Probe: thermocouples or Pt100
- Accuracy: ±0.03 %
- Supply: 9V battery
APT-2000 ALW
Temprature Transmitter
The APT‑2000 ALW is a high-precision, submersible temperature transmitter designed for hydrostatic (level) measurement applications. It transforms measured temperature under the probe (e.g., in wells or tanks) into a 4–20 mA output with HART communication, enabling continuous monitoring and easy configuration via local keys or remote tools.
- Measuring range: -70 to 500°C
- Process connection: G1/2"
- Immersion length: 100mm
- Output: 4-20 mA
JUMO Wtrans E01
Measuring probe for humidity, temperature, and CO2 With wireless data transmission
The Wtrans E01 is a versatile, wall-mounted wireless probe that captures environmental data-humidity, temperature, and CO₂ concentration-and transmits it via radio to a JUMO Wtrans receiver.
- Humidity range: 0 to 100 %
- Temprature range: -40°C to +80°C
- CO2 range: 0 to 10000 ppm
- Output: Radio frequency
- Protection type: IP 65
TNS
Safety Thermometers with Contact
The TNS is a robust, gas‑filled stem thermometer using nitrogen pressure inside a Bourdon tube to provide reliable temperature measurement and indication. It can also be equipped with one to four adjustable switch points, making it suitable as a hybrid temperature gauge and controller.
- Measuring range: -20 to +600°C
- Connection: back or bottom G½ - G1
- Material: aluminum; st-steel; plastic; steel
- Accuracy class: 1.0 or 1.6
- Option: contacts; gliding pointer; oil filling
TTL
Thermocouples
The TTL is a rugged and precise temperature sensor system consisting of a replaceable thermocouple insert housed in a durable thermowell assembly. Designed with threaded, flanged, or weld-on fittings, it accommodates varied process environments without needing to shut down systems for sensor replacement.
- Measuring range: -200 to +1100 °C
- Connection: thread; flange; weld-on sleeve
- Material: st-steel; alloys
- Thermocouples: FeCu-Ni; NiCR-Ni
- Accuracy class: 1 or 2
- Output: 4-20 mA